AGF Series-Specify For Rigid PP/HDPE Grandulator

ags.jpg

Optimally designed blades are sharp and powerful

Enclosed cutting chamber to prevent materials flying out

Knives are externally adjustable

Applicable materials: PP/HDPE barrel/basket/crate/caps/drum/milk bottle/water bottle etc.

1622444163427171.jpg

Barrel

1622444223645334.jpg

Baskets

1622444272318228.jpg

Caps

1622444295447210.jpg

Water

Unit Introduction

5

Large crushing chamber

20-40% additional throughput

Enclosed cutting chamber to prevent materials flying out

6

Motor

High efficiency and long operating cycle

Increased motor drive

7

Hydraulic station

long service time

Electrical hydraulic control to open housing

8

Wear plates

optional hard facing easy for exchange

Strong and durable

9

Rotating blade

Knives are externally adjustable

D2 material

10

Machine housing

Anti-wear machine housing

High strength and toughness

Turn-key project solution supplier

General Description

The AGF hard PP/HDPE matrial Granulator has been specially design for the processing of PP/HDPE barrel/basket/crate/caps/drum/milk bottle/water bottle etc.

It has a centrally hinged two-piece cutting chamber with a robust welded steel construction, with the upper and lower sections of the housing meeting horizontally. Heavy duty paddle type rotor in welded steel construction,Driving rotor Knives installed in “V” Angle, “X” cutting shape. Reversible stator knives with double cutting edges are fitted as single elements to the lower section of the housing, allowing multiple re-sharpening and adjustment of the stator knives. There is a hinged screen cradle and hinged door for easy screen access.

The rotor is a heavy duty paddle type design with knife cover plates to protect the blades when processing abrasive applications. The knife mounting bolts are screwed into the mounting plates as opposed to the rotor. All knives are manufactured from chrome nickel tool steel as standard, but when processing applications that are particularly abrasive the AGF granulators can be fitted with a specially designed wear resistant rotor utilizing wear resistant steel parts and hardox facing.

The v-cut cutting geometry offers distinct advantages over other rotor designs, including higher throughput with reduced power consumption, better quality cut, and lower noise levels. The AGF rotor configuration provides between 20-40% additional throughput in comparison to standard rotor configurations.

Specially designed knife setting jig means that the knives can be adjusted from outside the machine, significantly reducing the downtime required to change/set knives.

The base frame has a solid welded construction with anti-vibration rubber feet to reduce vibration and noise. The drive motor is mounted on tension rails to allow easy adjustment of the V-belt tension. Integrated suction trough for material discharge.

Specially designed hopper with 3 sets of curtains to prevent material flybacks.

Integrated rundown safety device prevents access to the rotor until it has come to a complete stop. A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.

KITECH IS COMMITTED TO BECOMING A WORLD-RENOWNED RECYCLING EQUIPMENT MANUFACTURER.

Floor Plan

Specification

itemutinAGF500/700AGF700/1000AGF700/1200AGF800/1200AGF800/1600
Cutting Chambermm500x700700x1000700x1200800x1200800x1600
Rotor Diametermm500700700800800
Rotor widthmm7001000120012001560
Rotor Speedrpm570555555555450
Main Motor Powerkw557590132160
Rotor Knivespcs5*25*2/7*25*2/7*25*2/7*27*4/9*4
Stator Knivespcs22224
Hydraulic Ram Powerkw3.755.65.65.65.6
Screen Sizemm10~1640~6040~6010~2040~60
Capacitykg/hr500-600900-12001200-15001800-20003000-3500