How to lubricate plastic granulator

The plastic granulator can turn waste into treasure, which has greatly promoted our economic progress. When operating the plastic granulator, we must strictly abide by the regulations, maintain the plastic granulator regularly, and perform regular inspections on the plastic granulator. The parts are lubricated to ensure the normal operation of the plastic granulator. So what are the lubrication tasks of the plastic granulator?

During the use of the plastic granulator, lubricating oil must be added regularly to ensure better use of the parts and extend the service life of the plastic granulator. When refueling the plastic granulator, ensure that the oil overflows from the cup. In addition, do not let it flow around the machine and on the ground. This will not only easily cause material contamination, but also affect product quality.

The turbine box of the plastic granulator must store oil for a long time. During the use of the plastic granulator, make sure to change the oil with new oil every three months to avoid contamination of the oil, which will affect the use effect and cause wear of the machine parts.

The box of the plastic granulator should be fully refueled before opening. During operation, oil can be added according to the temperature rise and operation conditions of each bearing. When operating the plastic granulator, you need to check the temperature changes of the machine body at any time. If you touch the sliver with clean hands and it does not stick to your hands, you should raise the temperature immediately until the slivers stick to your hands, which is normal.

When the plastic granulator reducer shaft makes noise, we should promptly add lubricating oil and maintain lubrication to avoid affecting the normal operation of the plastic granulator. The operator must be familiar with the operation of the machine. When the machine temperature is too high and the speed is too slow, we should make timely adjustments according to the situation to ensure the operation of the plastic granulator.