Daily maintenance of multifunctional plastic crusher

The multifunctional plastic shredder can be used not only to process hard plastic waste such as plastic plates, plastic barrels, and plastic pipes, but also to process soft plastic waste such as plastic films, ton bags, and agricultural film and plastic films. In addition to the performance of the equipment itself, the stable operation of the equipment and the prolongation of the service life of the equipment are also crucial to the daily maintenance of the multifunctional plastic crusher.

Maintenance method of multifunctional plastic crusher:

1. The equipment should be installed on a flat and stable ground to ensure reliable grounding, and sufficient operating space should also be reserved for easy operation and daily maintenance of the equipment.
   

2. Before starting the machine, check the fasteners of the equipment to see if there is any looseness. If there is looseness, tighten it in time. Check the tool wear, keep the blade sharp, and check for debris in the crushing cavity. After checking the condition of the equipment, start the button and observe whether there is any abnormal sound in the equipment.

3. In broken plastic products, metal and related parts cannot be mixed in it to prevent equipment damage.

4. During the operation of the equipment, always pay attention to the crushing situation inside the equipment. If there is a material jam, stop feeding and continue to work after the cutter shaft reverses normally.

5. In addition to the maintenance of the operation process of the equipment, in the daily maintenance, it is also necessary to observe the position of the hydraulic oil, check whether there is oil leakage at the joints of each hydraulic component, and check the lubrication of each component.

Above is the daily maintenance method of the multi-functional plastic crusher . In the process of use, it is necessary to pay more attention to the status of the equipment, reduce equipment failures, reduce maintenance costs, and spend more time on maintenance in order to spend less time on maintenance and reduce the operation of the enterprise. cost.