Optimally designed blades are sharp and powerful
Enclosed cutting chamber to prevent materials flying out
Knives are externally adjustable
Large diameter flat rotor
Machined pocket knife holders
Optional hard facing
50000 hours long stable running
Vertical compact structure
Long time operation without oil leakage
Robust ram construction
Powerful hydraulic swing type ram
PLC automatic control
Hard D2 material
Concave ground square knives
Famous brand from japan
high strength and toughness
The AGS General Purpose Single Shaft Shredder has a 457mm diameter profiled rotor made of 74rpm . The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the cutting gap between the counter knives and the rotor which guarantees a high flow rate ,low power consumption and maximum output of shredded material.
The hydraulically operated ram feeds the material automatically in the rotor’s cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.
Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust dirt penetrating into the oversized bearing. This ensures a long service life and minimum service and maintenance.
Power is transmitted from the motor by a drive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.
A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.
|Main Motor Power||kw||37/45/55||55||75||74|
|Hydraulic Ram Power||kw||3.75||5.6||5.6||5.6|
|Screen Working Area||mm||800x730||800x1000||800x1290||800x1860|